Ultimate reach for fast precision handling
Ideally suited for working in compact robotic cells, the slimline Fanuc M-10iD/8L Robot occupies a small footprint and can be installed upside down or angle mounted for even more flexibility. For easy and reliable routing of sensor or camera cables, air pipes and other utilities, services are routed through the robot’s hollow arm, wrist and body.
Slim curved J2 arm
A new lightweight design minimises interference against workpieces and fixtures in order to allow more productivity in your working area.
Minimised integration efforts and optimised cable life span
Fully integrated hosepack and cable management design where the cables are lead through the robot’s hollow arm, wrist and body.
The specialist for low payload material handling
Diminished cycle time – higher productivity owing to the M-10's very rigid hollow arm and advanced servo technology for increased acceleration performance.
Robot specifications
| Fanuc M-10iD/8L Robot |
||
| Controlled Axes | 6 | |
| MaxLoad Capacity At Wrist [kg] | 8 | |
| Repeatability [mm] | 0.03 | |
| Mechanical Weight [kg] | 180 | |
| Reach [mm] | 2032 | |
| Motion Range [°] | J1 | 340 (370) |
| J2 | 235 | |
| J3 | 455 | |
| J4 | 380 | |
| J5 | 360 | |
| J6 | 900 | |
| Maximum Speed [°/s] | J1 | 210 |
| J2 | 210 | |
| J3 | 220 | |
| J4 | 430 | |
| J5 | 450 | |
| J6 | 720 | |
| J4 Moment / Inertia (Nm / kgm2) | 16.1 / 0.63 | |
| J5 Moment / Inertia (Nm / kgm2) | 16.1 / 0.63 | |
| J6 Moment / Inertia (Nm / kgm2) | 5.9 / 0.61 | |
| Mounting Method | Floor, Angle, Wall, Ceiling | |
Team work
For the ultimate in automated material handling, coordinated motion functionality enables robots to work together, manipulating workpieces for one another and providing exact work and travel angles.
Smart Offline Programming
This robot model is integrated into the FANUC's own offline programming software ROBOGUIDE. ROBOGUIDE is a powerful tool that enables integrators, planners and users to design cells, systems and motions offline.